CSDuragi.COM Forum

Botun İp adresini yazıyorum portada server ip atıyorum 40 yazıyorum ama bot ts3 e girmiyor 2 gün önce giriyordu. bunun çözümü nedir ? Araştırdığıma göre güvenlik seviyesi felan diyor anlamadım. Yardım ederseniz sevinirim iyi günler.

Instance Log kısmında ne yazıyor?

Eğer log level hatasıysa bir arkadaştada yardımcı olmuştum hangi scripti kullandığınızı bilmiyorum sinusbot olarak yazacağım.

REVERAL yazdı: Pzr Eyl 09, 2018 2:36 pm Çözümü şu şekilde.

Makinenize giriş yaptıktan sonra cd /home/sinusbot yazarak klasöre girin. Hangi portta loglevel hatası yaşıyorsan onun klasörüne gir ben 8087 olarak örnek alıyorum anlaman için. Daha sonra cd ts3soundboard8087 (eğer farklıysa ls yazarak bakabilirsin dosya ismine) yazarak port klasörüne girin. Sonra nano config.ini yazın. Loglevel i bulup karşısını 10 olarak değiştirin Loglevel = 10 şeklinde CTRL+X Enter yapıp çıkın. Ardından makinenize reboot atıp bota start verin. Aşağıya resimde bırakıyorum bakabilirsin.

Resimi sildim ama buraya girip bakabilirsin resime -> bilgisayar-mobil-internet-teknoloji-f33 ... 13-10.html

018-09-09T18:08:17+03:00 Storing configuration.
2018-09-09T18:07:49+03:00 TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018-09-09T18:07:49+03:00 Closed.
2018-09-09T18:07:49+03:00 TS>QXcbConnection: Could not connect to display unix/:40.0
2018-09-09T18:07:49+03:00 TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018-09-09T18:07:48+03:00 Starting instance ts3server://ts40.csduragi.kim?port=9997&nickname=wqewqewq&password=&channel=&channelpassword=
2018-09-09T18:07:48+03:00 About to run.
2018-09-09T18:07:48+03:00 Prespawn.
2018-09-09T18:07:47+03:00 BOT-CONFIG [admin] PORT CHANPW CHAN ANNOUNCE DESCRIPTION ANNOUNCESTR TTSURL CC OK
2018-09-09T18:04:17+03:00 Storing configuration.
2018-09-09T18:03:56+03:00 TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018-09-09T18:03:56+03:00 Closed.
2018-09-09T18:03:56+03:00 TS>QXcbConnection: Could not connect to display unix/:40.0
2018-09-09T18:03:56+03:00 TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018-09-09T18:03:55+03:00 Starting instance ts3server://ts40.csduragi.kim?port=27015&nickname=wqewqewq&password=&channel=&channelpassword=
2018-09-09T18:03:55+03:00 About to run.
2018-09-09T18:03:55+03:00 Prespawn.
2018-09-09T18:03:53+03:00 BOT-CONFIG [admin] HOST PORT CHANPW CHAN ANNOUNCE DESCRIPTION ANNOUNCESTR TTSURL CC OK
2018-09-09T18:02:47+03:00 Storing configuration.
2018-09-09T18:02:37+03:00 TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018-09-09T18:02:37+03:00 Closed.
2018-09-09T18:02:37+03:00 TS>QXcbConnection: Could not connect to display unix/:40.0
2018-09-09T18:02:37+03:00 TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018-09-09T18:02:36+03:00 Starting instance ts3server://54.38.106.238?port=40&nickname=wqewqewq&password=&channel=&channelpassword=
2018-09-09T18:02:36+03:00 About to run.
2018-09-09T18:02:36+03:00 Prespawn.
2018-09-09T18:01:47+03:00 Storing configuration.
2018-09-09T18:01:39+03:00 TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018-09-09T18:01:39+03:00 Closed.
2018-09-09T18:01:39+03:00 TS>QXcbConnection: Could not connect to display unix/:40.0
2018-09-09T18:01:39+03:00 TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018-09-09T18:01:38+03:00 Starting instance ts3server://54.38.106.238?port=40&nickname=wqewqewq&password=&channel=&channelpassword=
2018-09-09T18:01:38+03:00 About to run.
2018-09-09T18:01:38+03:00 Prespawn.
2018-09-09T18:01:33+03:00 TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018-09-09T18:01:33+03:00 Closed.
2018-09-09T18:01:33+03:00 TS>QXcbConnection: Could not connect to display unix/:40.0
2018-09-09T18:01:33+03:00 TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018-09-09T18:01:33+03:00 Starting instance ts3server://54.38.106.238?port=40&nickname=wqewqewq&password=&channel=&channelpassword=
2018-09-09T18:01:33+03:00 About to run.
2018-09-09T18:01:33+03:00 Prespawn.
2018-09-09T18:01:17+03:00 Storing configuration.
2018-09-09T18:01:11+03:00 TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018-09-09T18:01:11+03:00 Closed.
2018-09-09T18:01:11+03:00 TS>QXcbConnection: Could not connect to display unix/:40.0
2018-09-09T18:01:11+03:00 TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018-09-09T18:01:11+03:00 Starting instance ts3server://54.38.106.238?port=40&nickname=wqewqewq&password=&channel=&channelpassword=
2018-09-09T18:01:11+03:00 About to run.
2018-09-09T18:01:11+03:00 Prespawn.
2018-09-09T18:01:09+03:00 BOT-CONFIG [admin] HOST PORT CHANPW CHAN ANNOUNCE DESCRIPTION ANNOUNCESTR TTSURL CC OK
2018-09-09T18:00:47+03:00 TSClient quit. LogLevel has been increased, please try to connect again to see more details.
2018-09-09T18:00:47+03:00 Closed.
2018-09-09T18:00:47+03:00 TS>QXcbConnection: Could not connect to display unix/:40.0
2018-09-09T18:00:47+03:00 TS>QCoreApplication::applicationDirPath: Please instantiate the QApplication object first
2018-09-09T18:00:46+03:00 Starting instance ts3server://?port=9987&nickname=wqewqewq&password=&channel=&channelpassword=
2018-09-09T18:00:46+03:00 About to run.
2018-09-09T18:00:46+03:00 Prespawn.
2018-09-09T18:00:46+03:00 Spawning instance shortly due to missing configuration file.

Loglevel hatası şuanki botu silip yeniden bir bot oluşturupta deneyebilirsin olmadı üstte attığımı yap kesin sonuca ulaşırsın.